top of page

Muses of Daoud

'

An Inspired Legacy

Celtic Designs

You can see Da'oud's aquatic inspiration in this design, which blends his love of both celtic and organic designs. This ring features a 5mm stone within the swirling waters of the design. This ring measures 10.3mm in the center front and 2.8mm around the band.

We have several variations of this design with a wider band (RS-53) or featuring stones from 3mm (RS-3b) to 6mm (RS-3a) wide, depending on your preferences, as well as a 3 stone version (RS-3c).

This setting can accommodate a faceted or cabochon stone.

Catalogue Number RS-3

5mm Celtic Swirl Ring

RS-3

You can see Da'oud's aquatic inspiration in this design, which blends his love of both celtic and organic designs. This ring is the 6mm stone version of the original design (RS-3). This ring measures 9.45mm in the center front of the band and tapers down to 3.5mm around the band.

We have several variations of this design with a wider band (RS-53) or featuring stones down to 3mm (RS-3b), depending on your preferences.

This setting can accommodate a faceted or cabochon stone.

Catalogue Number RS-3a

6mm Celtic Swirl Ring

RS-3a

You can see Da'oud's aquatic inspiration in this design, which blends his love of both celtic and organic designs. This ring features a 2.7mm stone within the swirling waters of the design which wraps around the wide band.

We have several variations of this design with a larger 5mm stone (RS-53).

This setting can accommodate a faceted or cabochon stone.

Catalogue Number RS-3b

2.7mm Celtic Swirl Wide Band

RS-3b

You can see Da'oud's aquatic inspiration in this design, which blends his love of both celtic and organic designs. This ring features a 5mm stone between two side stones within the swirling waters of the design.

We have a solitaire version of this ring featuring a 5mm stone (RS-3) or a 6mm stone(RS-3a) depending on your preferences.

This setting can accommodate a faceted or cabochon stone.

Catalogue Number RS-3c

5mm 3 stone Celtic Swirl Design

RS-3c

This epic ring features a large 10x8mm stone set at the front of our Celtic flat band. It is perfect for those who prefer wider bands but still want a bit of bling on their finger.

This setting can accommodate a faceted or cabochon stone.

Catalogue Number RS-34

10x8mm Men's 6 prong Celtic Ring

RS-34

You can see Da'oud's aquatic inspiration in this design, which blends his love of both celtic and organic designs. This ring features a 5mm stone within the swirling waters of the design in a wider band. It measures 11.15mm in the center front and tapers down to 4.75mm along the back of the band.

We have several variations of this design with thinner band (RS-3) or featuring stones from 3mm stone (RS-3b).

This setting can accommodate a faceted or cabochon stone.

Catalogue Number RS-53

5mm Celtic Swirl Wide Band

RS-53

The round stone in this setting really pops in the center of a tapered band of Celtic knotwork. If you like wider bands but still want a bit of bling, this is the perfect ring for you.

If you like the knotwork but prefer it without a stone, check out some of the bands in our Celtic Flat Knot collection like the medium (WB-73) or wide (WB-68) versions.

This setting can accommodate a faceted or cabochon stone.

Catalogue Number RS-54

8mm Men's Celtic Tapered Ring

RS-54

This delicate ring features two woven knots circled around a 3mm stone. It is 8.5mm wide in the center front and tapers down to a more comfortable 2.5mm around the band.

We have a version of this ring with a 6x4mm stone as well (RS-72a).

This setting can accommodate a faceted or cabochon stone.

Catalogue Number RS-72

3mm Double Triscalia Ring

RS-72

This ring features a 6x4mm gemstone within the knotwork of two triscalia. It is 8.5mm wide in the center front and tapers down to a more comfortable 2.5mm around the back.

If you prefer a smaller stone, check out our 3mm Double Triscalia Ring (RS-72).

This setting can accommodate either a faceted or cabochon stone.

Catalogue Number RS-72a

6x4mm Double Triscalia Ring

RS-72a

This Claddagh is one of our traditional styles with a 5x5mm heart-shaped stone. Styles with different stone sizes are available. It measures 11.25mm in the center front and tapers quickly down to 2.8mm along the band.

This setting can accommodate a faceted or cabochon stone.

Catalogue Number: RS-77a

5x5mm Claddagh

RS-77a

This is the smallest of our Claddagh collection. The small stone is a dainty 4x4mm held by smaller designed hands and crown.

This setting works best with a faceted stone.

Catalogue Number RS-77b

4x4mm Claddagh Ring

RS-77b

This simple ring features a 4mm stone between two triknots, or triscalia. The power of three is strong with this design. It is 5.5mm in the center where the stone sits within a 4mm wide band.

We have many variations of the TriKnot design, including (but definitely not limited to!) one with a 5mm stone and thinner band (RS-82), a three stone version of this band (RS-82ca), and a marquis shaped stone version (RS-82d).

This setting can accommodate both a faceted or cabochon stone.

Catalogue Number RS-82c

4mm TriCeltic, Wide Band

RS-82c

This delicate ring features a small but conspicuous 5x3mm marquis cut stone. Inside the two triknots are small 2mm stones on either side of the central stone.

If you want to see a smaller, more dainty stone in this designs, check out our 4mm Three Stone TriCeltic Ring (RS-85a).

Catalogue Number RS-85b

5x3mm Three Stone TriCeltic Marquis Ring

RS-85b

This celtic ring is both detailed and dainty. It features a 6x4mm stone within a cetlic knot design in relief. The ring measures 7mm wide at the center front and tapers gradually down to 2.25mm in the back of the band.

This setting can accommodate a faceted or cabochon stone.

Catalogue Number RS-91b

6x4mm Celtic Lite

RS-91b

This ring is for all the Scots out there! The thistle is the national flower of Scotland. Legend says its spiky blooms once thwarted an invasion. This ring features two detailed thistles on either side of the band hold up a 6mm stone within their thistle-down. The integrated design of this band is truly unique. It is 7.45mm wide in the center front and tapers gradually down to 2.65mm in the back of the band.

This setting can accommodate either a faceted or cabochon stone.

Catalogue Number RS-127

6mm Thistle Ring

RS-127

This ring is another design with our Celtic Swirl collection. It is decorated around the band with our Celtic Flat Knot, swirling in the front to show off the 7x5mm stone in the center.

If you prefer this knotwork design without a stone, check out our Celtic Flat Band (WB-68).

This setting can accommodate either a faceted or cabochon stone.

Catalogue Number RS-128

7x5mm Swirl with Celtic Flat Band

RS-128

This version of the Claddagh was designed by Da'oud for our friend Damon, who used to be the one to help us set up our booth in Southern California. We continue this design to commemorate them both!

This ring features a 6x6mm heart-shaped stone being held by two hands that transition into an open weave knot work band. This design can be thinned out to lessen the weight if you would like to see it cast in gold or platinum. It measures 10.65mm in the center front and 6.05mm around the knotwork.

A version of this design is also available without a stone (WB-109)

This setting can accommodate a faceted or cabochon gemstone.

Catalogue Number RS-132a

6x6mm Damon Claddagh

RS-132a

This is one of our most popular Celtic bands in our collection. It features a 5mm stone at the front of our Celtic band design. It measures 6.65mm around the band.

If you prefer to see this band without a stone, check out our Celtic Medium Band (WB-7). Or if you would like a narrower Celtic band, see our 5mm Celtic Thin Band (RS-84).

This setting can accommodate either a faceted or cabochon stone.

5mm Celtic Band

RS-138

This claddagh is perfect for those who prefer a band style, but still want the sparkle only a gemstone can give! This piece is 7.55mm wide in the center front but tapers to a comfortable 2.45mm around the back. The sides of the design have a Celtic knot tapering with the ring.

We have a variation of this design without a stone as well, check out our Claddagh Tapered Band with Knots (WB-102).

Catalogue Number RS-159

5x5mm Claddagh Tapered Band with Knotwork

RS-159

This is the widest of our classic pierced celtic knot collection. It is 7.2mm all the way around the band. The pierced design keeps the piece light and breathable, the best for casting in gold or platinum.

There are bands of this design with more narrow widths, with and without rails and piercing. It also has a variation with a 5mm gemstone set within the knotwork.

Catalogue Number WB-5

Celtic Band Wide, Pierced

WB-5

This epic ring features our Celtic knotwork circling the band between two raised rims, adding to the substantial heft of this band. The pierced design lightens it up a bit and brings out the details of the knot. It is 9x5mm wide all the way around the band.

If you prefer thinner versions of this band, check out the Celtic Pierced Wide Band (WB-5) or the Medium Band (WB-7).

Catalogue Number WB-5b

WB-5b Celtic Pierced Extra Wide Band

WB-5b

This design is similar to our other wide Celtic band (RS-6a) but this one is topped with two thin rails on either end. The images below show this ring in both Sterling Silver and 14k Gold, both with and without antiquing, the black layered within the knotwork to bring out the design. It is 7.5mm wide all the way around the band.

Catalogue Number WB-6

Celtic Band Wide, Not Pierced

WB-6

This ring is the same celtic knotwork of many of our rings, but this one is not pierced. It creates a nice, solid ring. Though it is heavier, it is stronger due to its solid nature. This ring is 7.5mm wide all the way around the band. The photos below shows the ring both with and without 'antiquing', a black lacquer paint that sits with the design and brings out the details.

Catalogue Number WB-6a

Celtic Wide, Not Pierced, No Rails

WB-6a

This is the middle size of our classic pierced Celtic knot collection. It is 6.5mm all the way around the band. The pierced design keeps the ring light and breathable, the best for casting in gold or platinum.

There are bands of this design with different widths, both wider and narrower.

Catalogue Number WB-7

Celtic Band Medium, Pierced

WB-7

This is the most narrow width of our classic pierced Celtic knot collection. It is 5.5mm all the way around the band. The pierced design keeps the ring light and breathable, the best for casting in gold or platinum.

There are bands of this design with wider widths available.

Catalogue Number WB-12

Celtic Band Narrow, Pierced

WB-12

bottom of page