top of page

Muses of Daoud

'

An Inspired Legacy

Grapes on the Vine Designs

This is the original version of our 6x4mm Grapes on the Vine design. It features the same 6x4mm center stone but the side stones are larger than the newer version, measuring at 3.5mm. Grapes drape over the top and bottom of the design as well. It is 9.25mm wide at the center stoner and tapers down to 3.6mm along the back of the band.

There is a thinner version of this ring with smaller side stones (RS-83).

This setting can accommodate either a faceted or cabochon stone.

Catalogue Number RS-66

6x4mm Grapes on the Vine Wide

RS-66

This ring, featuring a 6x4mm stone in the center, has twirling grapevines and small grapes ready for the harvest. The two side stones measure 2.5mm and add sparkle to the overall design. It measures 7.75mm wide at the center stone and 2.45mm around the back of the band.

This ring has two different compliments that fit the design, one for the top and one for the bottom. We also have a version with all three rings together.

This setting can accommodate a faceted or cabochon stone.

Catalogue Number RS-83

6x4mm Grapes on the Vine 3 Stone Ring

RS-83

This five stone ring was designed to nestle atop our 6x4mm Grapes on the Vine design (RS-83). A matching ring (RS-83b) nestles the bottom of the ring. It also works wonderfully to stack atop any ring you wish!

This setting can accommodate faceted or cabochon stones.

Catalogue Number RS-83a

2.7mm Grapes on the Vine 5 stone Top Compliment Ring

RS-83a

This is the ring we call our Rock Star Piece. It is all three Grapes on the Vine rings (RS-83, 83a, 83b) combined to create one stunner of a ring.

Of course, this ring can still be purchased as 3 seperate rings if that is prefered.

This setting can accommodate faceted or cabochon stones.

Catalogue Number RS-83c

6x4mm Grapes on Vine Three Ring Weld

RS-83c

bottom of page